|
|
|
|
| Cable Entry Seals
|
Breakout Boots
|
High Ratio Tubing
|
Transition Boots
|
Nu-Tech | Custom
Molding
|
Contact Us |
End Caps Instructional Here
These 6:1 ratio heat shrink End-Caps are ideal when trying to seal a large variation of cable, tubing & hose sizes.
Heavy Wall Tubing End Caps
Our product gives the optimum mechanical protection when used as a jacket, cover or end seal. Its high abrasion resistant formulation combined with an extra heavy wall designed to protect from a variety of elements.
Available with Sealant and or Valves
|
Part Number Code |
Recommended Cable Range |
Expanded Diameter (Min)
|
Recovered Diameter (Min)
|
Nominal Length (Inches) |
Recovered Wall Thickness (Inches) |
Adhesive Coating Thickness (Inches) |
|
Nu080X025 |
.25-.75 |
.80 |
.25 |
3.00 |
0.140 |
0.02 |
|
Nu137X050 |
.50-1.35 |
1.37 |
0.50 |
3.50 |
0.150 |
0.02 |
|
Nu200X075 |
.75-2.00 |
2.10 |
0.75 |
3.50 |
0.150 |
0.02 |
|
Nu380X150 |
1.60-3.75 |
3.80 |
1.50 |
4.50 |
0.180 |
0.02 |
Advantages
Actual 6 to 1 Expansion Ratio
Low Water absorption
Excellent Durability and Toughness
Resistant to Oils and Chemicals
Available in 12" lengths
Adhesive coatings available
Protection from extreme environmental conditions
Heavy Duty Abrasion Resistance
Nu-Tech offers a wide variety of End Caps. Some of our most popular are shown here. As always please call for any custom Size Requirements. Our In house Tool and Die shop can create may special mold configurations designed to fit your specific needs.
Website created by Keven Crick NcPcDoc dot com
